The Art Of Cable Folding
Since Michael posted his review of Cable Organizer, I figure now would be a good time to show you some of my cable folding skills when it comes to building computer systems.
I discovered the art of cable folding while meeting with Calgary based, Voodoo PC (now owned by HP). Before that meeting, I used rounded cables like everybody else. Voodoo PC was reluctant to show me how they fold their cables to create their look. They refused to open the case so I can poke inside. That would stop the average person but not the root of all evil. 
Folding computer cables serves two purposes. The first is to achieve a super clean look. The second is to maximize the airflow going though the computer case. Nothing messes up airflow more than a bunch of dangling cables. Rounded cable helps this problem but they still tangle inside the case and still block airflow. A properly fold cable will snake along the sides of the case so air flow is not disrupted and will look cleaner than anything you can do with rounded cables. The following is three systems I’ve built using proper cable folding techniques.
The LAN Boy
The Black Beauty
The Black Beauty II
- Posted in Technology
- 54 comments what's your take?
Sorry, the comment form is closed at this time.
Loading ...
Nice looking cables, but still not as clean looking as a Mac Pro!
Reply to this commentOh come on! Everyone of those machine look very clean! I would be proud to show off any of those - especially if I had done it myself, and not bought them that way!
Reply to this commentHow often do you open your pc and show your friends your cable art?
Reply to this commentNot often I guess. But it is a trend and many of the techies in this area is doing the same. It has the ‘wow’ effect.
Reply to this commentThat’s why I like having a window in my PC. To show off the insides, people love looking in side my machines!
Reply to this commentPeople who aren’t familiar with pc hardware are fascinated by the innards of computers. Throw in a few neons and they are mesmerised.
Reply to this commentMy friend always rubs it into my face about how his mac is much better than my PC.. but its kinda true - i can’t even defend myself anymore haha.
Reply to this commentBut, did you build your PC?
Reply to this commentI’ve seen disassembled pictures of the Mac Pro (and Power Mac G5), and there are additional panels designed to hide the cabling. The Mac Pro also benefits from custom drive cages and case parts.
Reply to this commentThose do look nice on the inside!
Reply to this commentI was going to suggest black cables when looking at the black beauty, but then I saw mk2!
Very nice work. But still not as clean as the internals of a mac
Reply to this commentJohn that was amazing……………..
Reply to this commentgonna try it
Those pictures just gave me some bad flashbacks. I used to work in a factory building pc’s and we used to fold the cables like that. Repetitive work is not good for the soul, or the body for that matter.
Reply to this commentI can imagine that, folding cables all day long would suck!!!
Reply to this commentMy neck used to get so sore leaning over a bench all day. And those cases have lots of sharp edges. It wasn’t fun
Reply to this commentAnd I’ll bet they weren’t tool less either!
Reply to this commentArgh the tools. Why did you remind me. Everyone would steal each others screwdrivers and clippers, and if you believe it, peoples bins.
Reply to this comment
Intresting picture actually
Reply to this commentBeen there, done that. MY worst job in my life was dishwashing.
Reply to this commenthaha I’ve done dishwashing too. And that was after I quit the job building pc’s.
Reply to this commentI’ve done that, I did a few days at a company that built OEM machines for a local company (If anyone in the lower mainland know who TLD is ;))
Cable folding is can get a bit repetative…
Reply to this commentFolding Cable is not that bad, I had a job back in the day, build Custom “Gaming” machines for a computer store. Over time you develop tricks and can build them pretty fast.
Nice Job John, Super Clean!
Reply to this commentCool write-up. I used to worry about the interior of my case and would spend a few hours during initial hardware install to make sure everything looked “pretty”. I still do this for my main system, but have given up all hope on my dedicated test computer since I change out hardware on a near-daily basis lol
Reply to this commentBTW, what are the specs of that first computer? Looks pretty old… ugly mobo and the IDE HDD give it away heh
Reply to this commentSharp eye Shawn, but we are talking about ribbon folding here!
Only The Black Beauty II is using SATA drives! In that case, we’re talking about cable management!
Reply to this commentDoes folding those ide cables not have adverse effects on the signal integrity? I know when laying out a board there are no 90 degree signals. Honestly can’t remember why you don’t, but thought the ide cables would need the same type of constraint.
Reply to this commentI’ve never had any problems with folded ide cables other than some older cables where some of the wires inside cracked.
Reply to this commentRight, I’m sure that in a server it might, but not on these machines.
Reply to this commentWow, I didn’t know cable folding could be such an artform.
Reply to this commentJust take a look inside any VooDoo machine!
Reply to this commentDeee-licious!
Reply to this commentI think people have too much time on their hands. Most of my hdd’s just hang out the side of the box. using the cable to hold them off the floor. I haven’t placed the sides on any case I have had for the last 15 years.
Reply to this commentIt’s not too much time on your hands, it’s the difference between just getting it done and getting it to the point where you’re proud of your work. Beyond that it’s not just aesthetic. The airflow within a case is very important to both performance and longevity.
Reply to this commentIf I could of cabled like this, then I would have never gone Mac . . oh wait, there was the whole Microsoft Windows thing . . . so ya, I would have still gone Mac . . . nice work though!
Reply to this commentIts been a while since I assembled a PC. And its true I never really cared about the whole airflow crap back then. But now I seriously need a fast laptop or a PC for some Linux experimentation. Maybe I will go with assembling my own this time. I think 2 laptops are enough already.
Reply to this commentIt is very colorful! But dealing with it seems to be a ‘nightmare’. I just can’t tell which is which!
Reply to this commentThe folded wires take less space, look good, and help with the airflow. But is it really worth all the extra work time and added expense to the consumer??
Reply to this commentCool - I never gave it a thought that this was a way of organizing the cables inside a PC. Proper airflow wasn’t the main priority the last time I built my last PC, though. You don’t need to pay attention to things like that on a mac
Reply to this commentWhen working for Micron PC back a few years… I learned proper cable folding and now these days I am shocked at the mess that pc makers deliver.
Reply to this commentNice way of handling the mess John, perhaps you could also try it with an Antec P180? I could use some advice; the cables are usually too short to sticky anywhere
Reply to this commentNice job, I think a cobweb folding article would be more use in my case
Reply to this commentWow. When I do cables they end up a complete mess. I never thought about folding them that way
Reply to this commentlol.. I wonder what a technician would say when you call him up for repairs one day.
Err.. Which one is the correct wire?
Reply to this commentZip ties, Matthew. Zip ties.
Reply to this commentVery good lucking body inside the CPU…
Reply to this commentNice and neat arrangement….
I’m really impressed….
What a soft hand….
The cable folding is a fantastic idea. All the best ideas look so obvious after someone show it to you. I am pretty surprised that they wouldn’t show the guts of the case though… Considering anyone who buys one can open it up, take a picture and post it online. But then again, I think that if I saw John asking me how the inner workings of my stuff worked I’d be worried. Someone that evil can’t be up to any good
Reply to this commentI do like the pictures, very clean. Also if you can tuck them out of the way properly they won’t get in the way for air-flow.
That being said, for those who don’t like folding cables or can’t for the life of them, pick up Rounded-IDE cables etc, they help keep the case neater and are a better for airflow too. Sometimes easier to tuck out of the way too.
Reply to this commentah…you had giving me an idea what should i do on this weekend. lol…
Reply to this commentI started doing this earlier on in my life with wireloom.
It was pretty decent, and worked really well for the time being. It seems however than this surpasses it by far.
Reply to this commentNice cabling! To say I’m now humbled… no, embarrassed with my cabling is an understatement. Ouch.
Reply to this commentnice work…I’m building a pc soon, so I’ll get to try my hand at cable folding…
Reply to this commentYou should put together a little tutorial - those are some pretty cables.
Reply to this comment